Since
1942
  • Backwater valves
    • Wastewater Fittings
    • Wastewater Technology
    • Wastewater Valves
    • Flap valves
    • Odor valves
    • Odor traps
    • Duct backwater flaps
    • Pipe flaps
    • Backwater automats
    • Back pressure in pipeline
    • Anti-flood valves
    • Backflow Control Valves
  • Non-return valves
    • Foot valves
    • Cone check valves
    • Diaphragm check valves
    • Non-Return Valves
    • Non-return armatures
    • Check Valve
  • About us
  • Contact / Partners
de
fr
en
it
es
nl
pt
pl
ru
hu
cs
tr
ar
ko
ja

Cone check valves with rubber diaphragm

  • Non-return valves
  • Cone check valves
Cone check valves with stainless steel valve cone and high-quality rubber diaphragm for silent use in drinking water pipes.

Technical features of our cone check valves

Our Stop Silent check valves are equipped with a diaphragm that prevents the back flow of liquid and gaseous fluids. The valve closes silently and without water hammer. This anti-reflux device ensures the required tightness even in the presence of dirty or granular fluids such as sand for example. The valve also acts as a raw filter and protects your systems. In addition, they do not have any moving mechanical parts subject to wear, which guarantees a long service life.

Cone check valves - Technical data

  • Flow velocity: (fluids) 2.5 m/sec.
  • Flow velocity: (gases) 15 m/sec
  • Installation sizes: from DN 20 to DN 600
  • Liquid: water, oils, acids and bases
  • PN nominal pressure: 16 bar
  • Heat degree: -20° to +200°C (no steam)
Learn more - Stop Silent

Installation examples of non-return valves

The membrane is located in the perforated support cone and the sealing lips rest on the inner surface of the cone. When the pressure increases, the membrane deforms and allows the fluid to pass through. In the event of a pressure drop, the diaphragm moves to the initial position and closes the cone check valve.

Non-return valve AS 54 - DN 40 to DN 200

  • without structural changes
  • for retrofitting
  • fast and cheap

Non-return plug valve AS 41 - DN 25 to DN 200

  • for standard fittings
  • for mounting in flat-sealing unions

Non-return valve AS NU - DN 25 to DN 100

  • For small flange diameters
  • With O-ring on the outside of the flange
  • For sanitary and industrial fittings

Cone check valve SFL Flange - DN 40 to DN 200

  • for flange valves from 40 to 200mm
  • hot-dip galvanized, powder-coated or stainless steel

Check valve MKV multiple plug - DN 150 to DN 600

  • powder coated or stainless steel
  • for pipe diameters from 150 to 600mm
  • as welded construction

Materials of the cone check valves

Our cone check valves are equipped with a diaphragm whose materials are to be chosen according to its use
Check valves with nitrile rubber diaphragm NBR:

  • for thermal cogeneration plants
  • for petrochemistry
  • for solar technology
Check valves with silicone diaphragm VMQ:

  • Water temperatures up to 100°C
  • For food industry and drinking water
  • Cold resistance down to approx. -60°C
  • Hot air temperatures up to +210°C
Check valves with ethylene-propylene-diene rubber diaphragm EPDM:

  • short term sterilisation with steam possible
  • for hot and cold water
Check valves with a Viton® Fluorcarbon diaphragm:

  • Temperature resistant -20 to +220 °C
  • for chemical industry
  • Acid resistant
Check valves with a fluorosilicone diaphragm FVMQ:

  • weatherproof
  • resistant to high and low temperatures
  • unalterable
  • ozone resistant

Stop Silent - Applications

Cone check valves from Lasso Technik AG have a wide range of applications
  • irrigations
  • process engineering
  • food industry
  • petrochemistry
  • solar technology
  • water treatment
  • Chemical industry
  • waterworks
  • groundwater pumps
  • sanitary facilities
  • fire protection systems
  • heating installations

Further areas of application for cone check valves

  • house installation
  • pumping stations
  • cooling water systems
  • water supply
Manufacturer, dealer, service provider
PDF Download
Stainless steel cone & rubber diaphragm
Information broschure
Go to product overview
Stop Silent
Interested ? Do not hesitate to send us all the information we need to process your request more efficiently.
Daniel Rohrer
CEO - Lasso Technik AG
Contact Form
Sitemap
  • Stop Silent Light
  • Stop Silent
  • Downloads
  • FAQ
  • Product overview
  • Contact form
  • GTC
Lasso Technik AG
Website
Dundi
Website
Contact
Lasso Technik AG
Niklaus von Flüe-Strasse 33
4059 Basel
Switzerland
+41 61 331 40 90
lasso@lasso.ch
Social Media
Copyright © 2020
  • Lasso Technik, AG
  • Data protection
  • Imprint
  • Sitemap
Inquiry