Backwater valves for wastewater or rainwater with anti-odour function and as flood protection from the sewer pipe system.
Our backflow control valves for waste water applications
Discover our Stop Silent Light check valve for private or industrial use. Our check valves can be easily and quickly installed in existing inspection shafts and drainage pipes. The non-return valve is designed for charged water up to 0.5 bar. In order to avoid the escape of sewage gases from the wastewater system to the sewer outlet, the waterproof membrane also acts as an odour blocker. Another advantage of the valve is its nose valve function. The infiltration of small animals into your sewer system is then reliably and permanently prevented.
Advantages of our Stop Silent SL13 backwater valves
Non-return valves to secure pipelines against backflow
Non-return valves to prevent small animals of all kinds from entering the ducts
Our non-return valves also act as odour stops
Easy installation in your sewer system without additional work
Functionality of Stop Silent Light
Lasso Technik AG check valves block the pipe wall with a waterproof rubber membrane that opens only under the pressure of flowing water. This action is due to an accumulation of water on the membrane, which opens its sealing lip upwards. The wastewater flow can flow freely. If the wastewater flow stops, the sealing lip closes and the wastewater pipe is sealed again.
Installation sizes of the backwater valves
Stop Silent SL13 is available in the following sizes.
Inner pipe diameter:
80 mm
100 mm
110 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Larger on request
Application examples of our backflow control valves
Our backwater valves have a wide range of applications.